TECHNICAL SPECS NEMO AW600
| All measurements are made at 120V / 240V //50Hz / 60Hz | |
| Amplifier section | |
| Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2% | |
| Input Impedance (Fixed) | 330 kohm |
| Output Impedance (20 Hz-20kHz) | < 0,009 Ohm |
| Frequency response (DC - 65 kHz) | - 0.4 dB |
| Input level for rated output | 1 V RMS |
| Max. peak current | > 150 A |
| THD(measured at 1 kHzhalf power,8W) | < 0,001 % |
| THD (measured at 1 kHz -1 dB, 8 W) | < 0,0015 % |
| Noise (measured with bothinputsshorted) |
400 Hz - 30 kHz : 150 µV DC - 30 kHz : 200 µV |
| Damping factor (20 Hz - 20 kHz) | > 850 |
| Rated output power | |
| 8 ohms | 600 W |
| 4 ohms | 1200 W |
| Power consumption (no load or signal) | 230 W |
| The NEMO is DC coupled from input to output | |
| Dimensions | |
| Width | 465 mm / 18.3 inches |
| Depth | 450 mm / 17.7 inches |
| Height | 288 mm / 11.3 inches |
| Weight | 41 kg. / 90.2 lbs. |
