The ECI 6D is a powerful integrated amplifier, equipped with a number of analogue and digital inputs offering a wide range of connectivity.
With its high performance sample rate converter and D/A converter the ECI 6D is able to improve all of your digital sources like TV’s, cable- and satellite tuners, CD/DVD/Blu-Ray players and not to forget your computer and media player. Independent of their native resolution all digital sources will be upsampled to 24bit/ 192kHz and can be connected by SPDIF, USB or Toslink.
The new ECI 6D offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To make it even better we have equipped with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable to control a wide range of speakers in the marked.
Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) inputs. Two preamplifier outputs, one balanced and one single ended, making sure the amplifier is prepared for future extensions.
|All measurements are made at 120V / 240V //50Hz / 60Hz|
|D/A converter||24 bit/192 kHz|
|Sample rate converter||24bit / 192kHz|
|Inputs||SPDIF, 2x Toslink, 1x USB|
|USB:||asynchronous up to 24bit/ 192kHz supported|
|Input impedance ( Balanced input )||47Kohm|
|Maximum input level||10 Volt RMS|
Noise floor (
1Vrms, 20 - 20 kHz, balanced)
|THD + N (1Vrms, 20 - 20 kHz, balanced)||<0.004%|
|Gain (Balanced)||0 dB|
|Output Impedance||< 0,02 Ohm|
|Frequency response||1 – 150 kHz|
|Channel separation||> 120 dB|
|THD ( 20 - 20 kHz)||< 0.004%|
|Maximum peak current||>100A|
|Damping factor 8 ohm load||>350|
|I Input sensitivity 120W output||1.3Vrms|
|Input sensitivity HT 120W output||1Vrms|
|Gain HT Input||x36 (31 dB)|
|Rated output power|
|8 ohms||2 x 125 W|
|4 ohms||2 x 200 W|
|2 ohms||2 x 370 W|
|(no load or signal)|
|Width||465 mm / 18.3 inches|
|Depth||405 mm / 16 inches|
|Height||128 mm / 5 inches|
|Weight||20Kg / 44 lbs.|