Electrocompaniet

DigitalEMC 1 MKIV ECD 2 ECM 2 EMP 3 Discontinued Power-amp Integrated Pre-amp Speakers Turntables

ECD 1 - discontinued

The ECD1 is a 24Bit 192KHz upsampler DAC accepting 16 - 24Bit input and upsample it to 24Bit resolution. This will give app. 10dB more headroom by lowering the noise floor, with more details reproduced.

The D/A converter is a sophisticated balanced 192KHz unit. Due to the higher sampling frequency and the cancellation of digital noise in the balanced system, the bandwidth is moved 2 octave up in frequency, compared to standard CD system using 44.1KHz sampling frequency, and therefore a 6dB rolloff can be used.

All analogue circuitry is fully balanced and symmetrical.

With four input's and connection for AES/EBU ( balanced ), RCA and TOSLINK, all standard formats are covered.

Two digital output for connection to multichannel receiver's etc. TOSLINK (Optical) and RCA.

Analogue output's - Balanced and single ended.

The digital and analogue circuitry used in the ECD1 is the same as our EMC1 UP CD player.

The ECD1 will improve the sound from any CD player, bringing it to a High-End source.

All measurements are made at 120V / 240V  //50Hz / 60Hz
Analog stage  
 
Output level(unbalanced) 1,6 V
Output level(balanced) 3,2 V
Gain(unbalanced) 1,6x(4dB)
Gain(balanced) 3,2x(10dB)
Maximum output(balanced) >14 V RMS
THD(1 V out, 1 Khz) <0,002 %
Channel separation(1 V out, 1 kHz) >90 dB
Equivalent input noise 4 uV
Analog filter(-3 dB) 75 kHz
Output impedance 100 Ohm
   
Digital stage  
 
Dig. inputs XLR-AES/EBU, RCA,OPTICAL TOSLINK
Dig. outputs RCA,OPTICAL TOSLINK
Signal to noise 100 dB
Dynamic range 100 dB
THD -100 dB
Frequency response 20Hz - 20 kHz
Input / Output impedance(fixed) 75 Ohm
Sampling frequency in 32 - 96 kHz
   
Power consumption
(no load or signal)
15 W
   
Dimensions  
   
Width 483 mm / 19 inches
Depth 255 mm / 10 inches
Height 83 mm / 3.2 inches
Weight 5 kg. / 11 lbs.

Reviews & Tests


Downloads